We take your privacy seriously. This policy describes what personal information we collect and how we use it.

Privacy Policy

Routine Information Collection

All web servers track basic information about their visitors. This information includes, but is not limited to, IP addresses, browser details, timestamps and referring pages. None of this information can personally identify specific visitors to this site. The information is tracked for routine administration and maintenance purposes, and lets me know what pages and information are useful and helpful to visitors.

Cookies and Web Beacons

Where necessary, this site uses cookies to store information about a visitor's preferences and history in order to better serve the visitor and/or present the visitor with customized content.Advertising partners and other third parties may also use cookies, scripts and/or web beacons to track visitors to our site in order to display advertisements and other useful information. Such tracking is done directly by the third parties through their own servers and is subject to their own privacy policies.

Controlling Your Privacy

Note that you can change your browser settings to disable cookies if you have privacy concerns. Disabling cookies for all sites is not recommended as it may interfere with your use of some sites. The best option is to disable or enable cookies on a per-site basis. Consult your browser documentation for instructions on how to block cookies and other tracking mechanisms.

Special Note About Google Advertising

Any advertisements served by Google, Inc., and affiliated companies may be controlled using cookies. These cookies allow Google to display ads based on your visits to this site and other sites that use Google advertising services. Learn how to opt out of Google's cookie usage. As mentioned above, any tracking done by Google through cookies and other mechanisms is subject to Google's own privacy policies.

About Google advertising: What is the DoubleClick DART cookie? The DoubleClick DART cookie is used by Google in the ads served on publisher websites displaying AdSense for content ads. When users visit an AdSense publisher's website and either view or click on an ad, a cookie may be dropped on that end user's browser. The data gathered from these cookies will be used to help AdSense publishers better serve and manage the ads on their site(s) and across the web. Users may opt out of the use of the DART cookie by visiting the Google ad and content network privacy policy.

Contact Information

Concerns or questions about this privacy policy can be directed to:


The Bendometer

  • The Bendometer is a program created by Joel that will allow you to see when you are bending a note and how far you are bending it.
  • You can install a working version of this software for a small donation of your own choosing. Anything from $7.00 up, depending on what you think of the product after you have tried it. Just go to HarpSoft .com for the installation instructions.
  • When you open the program on your computer it will look like this:



  • Now, if you take up your computer mic and play a "2 draw" on your "C" harmonica, you will notice from the screenshot below that you are playing the note "G". Blow notes are displayed above the numbers and draw notes below the numbers.



  • Now if you bend the "2 draw" down to "F" (a full tone), your bendometer will look like this:



  • If you are not bending the note fully your display may look something like this.


It's that simple!

Playing with Tabs

  • When you have a tab window open It will look like this


  • The Bendometer will display what note you are playing and which note you are to play next.

Harping Midi

Harping! Midi Player is a program created by Javier Argomedo that will convert Midi files to Harmonica Tab. You can download a working version for free. But in order to save any work you do with it, you will have to register your copy. I believe you will find that it is well worth the mere $16.00 he is asking.

How to download and install

  • To get your Harping! Midi Player you must go to http://www.harpingmidi.com/download.html
  • Then you must download the version that suits you and install it on your computer
  • When you click to download it, you may be asked if you want to save or open it, Click Save
  • When it's finsihed downloading click on the HarpingSetup file, and follow the instalation instructions.

How to use Harping Midi Player

  • Check out our Links Page for a list of MIDI sites and search engines.
  • As an example of a midi file to work with, right click desperado-in-g.mid, save it, and open it in "Harping Midi"
  • When you open desperado-in-g.mid in HarpingMidi it will look like this:


  • Press play just to see how things work and then open the Mixer Window which will look like this:


  • What you need to do now is find the melody track.
  • You can use the Mixer Window to mute different tracks. You can also hide tracks from the music staff which will help you determin which is the melody track.
  • With the following Mixer configuration you will notice that the Clarinet track is the melody track and the one you need tab for.


  • Our MIDI file is in the key of "G" and our tab is for a "C" harmonica. So you can now play Desperado (starting on 3 draw) in Second Position on your "C" harmonica by following the tab.
  • However if you open the the "Diatonic Harmonica Viewer" and check the "Show Stats" box you will notice that there are 37 bends and 5 overblows in this tab.


  • This is goin to make parts of the song difficult to play. So we need to experiment with it to improve the playability.
  • Click: Tools > Transpose > All full octave Up


  • Now our tab starts on "draw 7" and only has 5 bends according to the stats. But you may find that this is a little high pitched, so we'll connvert it to be played on an "A" Harmonica.
  • Change the Harmonica key to "A" and transpose the MIDI file down 3 semitones from "G" to "E"
  • You will need to click "All half step Down" 3 times to get to "E" which is second position on an "A" Harmonica.


  • Now that our song is a lot more playable we can create the Tab Track.
  • Click: Tools > Transpose > Create Tablature Text Track.
  • You will now see your tab track at the bottom of the page.
  • You should create your tab track when viewing the melody track only, because the program will create tab for all tracks together if you let it.



This is an good song for demonstrating how to use the Harping Midi program, but it is still quite a difficult song to learn if you are new to Harmonica. You may want to learn some easier songs first, before tackeling this one.

The Amazing Slow Downer

  • This program will allow you to slow down a song making it easier to learn.
  • When you slow a song down the pitch of the notes will not change, just the length.
  • You will be able to run nearly any type of sound file in this program (mp3's, wav's, etc..)
  • You can also put a regular CD in your computer and play songs from it.
  • This program currently costs $39.95 and can be downloaded from Roni Music.
  • You will be able to try it out by downloading the free trial version before you decide to buy it.
  • The free version has limitations, it can't play a whole song.
  • Wnen you open the program it will look like this:


  • A sample Riff at full speed

  • The same Riff at half speed

  • The same Riff at quarter speed




What is Note Bending?

Note bending is a technique used to change the pitch of a note and so reach notes that are not on a diatonic harmonica, For example, if you take the fourth hole on a key C harmonica, the blow note is a C and the draw note is a D. It is possible to play a C# by bending the 4 draw down by one half tone. This is accomplished by using a combination of your tongue, throat and lungs to vary the pressure of the air across the reed. Bending notes can be one of the more difficult techniques to master (it took me quite a while). Note bending lends that bluesy sound for which harmonica is known, and can be used in combination with other effects such as wah-wah to add more style and diversity to your playing. The 4 Draw was the first note that I learned to bend but this isn't true for everybody. If you have a lot of difficulty, practice your bends on other holes (either; 1 Draw, 2 Draw or 3 Draw).

Bending Hole 4, from D down to C#

We are going to jump straight in by discussing how to physically bend a note, I will explain the theory later. I'm going to start this lesson by demonstrating the 4 draw bend on a C harmonica. This is bending from note D to C#. Listen to it first.

Now that you know what it sounds like we are going to describe how it's done. Different folk have different ways of describing how to bend a note. This is a description of what I feel is happening. Look at the tongue movement in the picture below. While I am inhaling on the fourth hole, I dip the center of my tongue down leaving a larger space inside my mouth. The action of dipping my tongue down brings the note from D down to C#.

four hole bend

This is difficult to do because you will be training your tongue to do something unusual that it has never had to do before. But when you get the hang of it, it will be as easy as riding a bicycle. There are a few tricks that may help.

Can you whistle backwards? (make a whistle while inhaling). Whistle backwards and change the pitch of the whistle while inhaling. You will notice that you are moving your tongue back in your mouth, and so increasing the volume of the cavity or space within your mouth. This is a similar effect, but you will be doing this while leaving your tongue on the harmonica. You need to be able to leave your tongue on the harmonica, so that you can bend notes while tongue blocking (the style of playing which was described on the first lessons page).

When I was first trying to bend notes, it didn't come to me straight away. One of the things I did was to put some scotch tape (sellotape or sticky tape) on the front of the harmonica, so as to block all the holes except the one I was practicing on. This meant that I could achieve a bend using the whistle backwards method, and not be concerned about tongue blocking. If you are having difficulty bending a note while tongue blocking, this exercise will give you the sound and feel of playing a bent note. Although on the other hand, you really don't want to be covering your harmonicas in scotch tape if you can avoid it.

Bending Hole 3, from B down to Bb, A and Ab

The three-draw note on the harmonica can be bent down in three stages of a half tone each. Listen to the next recording to hear how it sounds.

The picture below shows the varying position of tongue during these notes.

three hole bend

The first note B is a straight note and can be played simply by inhaling on the third hole of your harmonica. You can then drop the pitch of this note down to Bb, A, and Ab, by dipping the center of your tongue down in three stages. You may find it difficult to tell if you are landing exactly on each half tone, so another good exercise is to finish on the 3 blow note. Finishing on the 3 blow note will mean that you are playing 5 notes of the chromatic scale on one hole of your harmonica, B, Bb, A, Ab, and G. This will make it easier for you to hear if you are spacing them apart properly (one half tone each).

Bending Hole 2, from G down to F#, and F

The two-draw note on the harmonica can be bent down in two stages of a half tone each. Listen to the next recording to hear how the bend sounds.

The picture below shows the varying position of the tongue during these notes.

two hole bend

The first note G is a straight note and can be played simply by inhaling on the second hole of your harmonica. You can then drop the pitch of this note down to F# and F, by dipping the center of your tongue down in two stages.

As you start to get the feel for these different bends you will notice that each hole behaves and feels different form the last. The larger reeds in the lower pitched holes allow a greater flow of air through the harmonica and into your lungs. This means that you will be inhaling a greater volume of air to achieve the pressure difference required to reach the bend. This will be particularly noticeable on the first hole.

Bending Holes 1, 5 and 6

The draw note on the first hole of your C harmonica can be bent down by a half tone, from D down to C#. These are the same notes as you played while bending the fourth hole, but they are an octave lower. You will notice that you are inhaling a lot more air while playing this bend. You won't have to worry about tongue blocking on the first hole, so you can draw your tongue back into your mouth if this makes it easier. The bend should sound like this.

You will be able to bend hole 5 down from E, but this is less than a half of a tone (even though it sounds like F). This bend can be used for effect but should not be used to play the note F. Some people also claim that bending the 5 draw damages the reed in that hole, but I dont see whey it should.

The sixth draw note on your harmonica can be bent by a half tone from A down to Ab, and it should sound like this.

This picture is here to illustrate all possible bends on a harmonica, We have just covered draw bends on holes 1 to 6. When learning how to play harmonica, beginners generally find the blow bends on holes 8 to 10 more difficult. So for the next exercise we will talk about some techniques that can be used in combination with bends.
Bend Harmonica




The wah-wah effect is achieved by opening and closing your hand at the back of the harmonica. When done in combination with note bending the effect can be enhanced. The first recording is simply a 4 draw without any bending (the note D).

Now! This time, start on the 4 draw bend C#, and release it to the straight 4 draw (going from C# to D). Do this repeatedly so that it sounds like wah-wah. Then add the wah-wah hand-effect.

Train Sounds

A train whistle effect can be achieved if you bend two holes together. Inhale on both 4 and 5 and then bend both notes together.

Blow Bending

Blow bending notes "feels" the exact same as draw bending, yet you will find it a little harder to master. There is no point practicing this technique if you haven't mastered the previous exercises. So, practice draw bending until you feel very comfortable with it.

Blow Bending Hole 8, from E down to Eb.

Hole 8 on your C harmonica can be bent down by a half tone from E to Eb.

The picture depicts what I feel that I am doing. I lift my tongue at the back and blow with "ever so slightly" more force. If you are having difficulty it will be easier if you start on a lower key harmonica, like G or A. You can then work your way up through the different key harmonicas.

eight hole bend

Blow Bending Holes 9 and 10.

Hole 9 is a similar experience but a little more difficult. It will bend from G down to F# (half tone).

The 10 hole blow bend on a C harmonica, will bend from C down to Bb (full tone). This is very difficult to do on a C harmonica and I find it hard to hold the note for any length of time. You will find it easier if you start with a G harmonica and work your way up to your C harmonica.